Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for 12v hydraulic power unit, hydraulic cylinder mounts, hydraulic cylinder mounts, If you have the requirement for virtually any of our items, make sure you call us now. We are wanting ahead to hearing from you before long.
Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend Detail:

Product Description

The tooth top cylinder and the end faces on both sides of a pair of gears meshing with each other are close to the inner wall of the pump casing, and a series of sealed working cavities K are enclosed between each tooth slot and the inner wall of the casing. The D and G cavities separated by the meshing gear teeth are the suction chamber and the discharge chamber communicated with the suction port and the discharge port of the pump, respectively. As shown (external meshing).

Gear pump 1

When the gear rotates in the direction shown in the figure, the volume of the suction chamber D gradually increases and the pressure decreases due to the meshing gear teeth gradually exiting the meshing state. Under the action of the pressure difference between the liquid surface pressure of the suction pool and the low pressure in cavity D, the liquid enters the suction chamber D from the suction pool through the suction pipe and the suction port of the pump. Then it enters the closed working space K, and is brought to the discharge chamber G by the rotation of the gear. Because the teeth of the two gears gradually enter the meshing state from the upper side, the teeth of one gear gradually occupy the cogging space of the other gear, so that the volume of the discharge chamber located on the upper side gradually decreases, and the liquid pressure in the chamber increases, so the pump is discharged from the pump. The discharge port is discharged out of the pump. The gear rotates continuously, and the above-mentioned suction and discharge processes are carried out continuously.

The most basic form of the gear pump is that two gears of the same size mesh and rotate with each other in a tightly fitted casing. The inside of the casing is similar to the “8″ shape, and the two gears are installed inside. The housing is a tight fit. The material from the extruder enters the middle of the two gears at the suction port, fills the space, moves along the casing with the rotation of the teeth, and finally discharges when the two teeth mesh.

YHY_8613
YHY_8614
YHY_8615

Features

1. Good self-priming performance.
2. The direction of suction and discharge depends entirely on the direction of rotation of the pump shaft.
3. The flow rate of the pump is not large and continuous, but there is pulsation and the noise is large; the pulsation rate is 11%~27%, and its unevenness is related to the number and shape of gear teeth. The unevenness of helical gears is smaller than that of spur gears, and the human The unevenness of the helical gear is smaller than that of the helical gear, and the smaller the number of teeth, the greater the pulsation rate.
4. The theoretical flow is determined by the size and speed of the working parts, and has nothing to do with the discharge pressure; the discharge pressure is related to the pressure of the load.
5. Simple structure, low price, few wearing parts (no need to set suction and discharge valve), impact resistance, reliable operation, and can be directly connected with the motor (no need to set a reduction device).
6. There are many friction surfaces, so it is not suitable to discharge liquids containing solid particles, but to discharge oil.


Product detail pictures:

Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend detail pictures

Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend detail pictures

Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend detail pictures

Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend detail pictures


Related Product Guide:

It is a good way to enhance our products and solutions and repair. Our mission will be to build creative solutions to consumers with a great experience for Super Purchasing for boom lift operation - Manufacturers supply gear pump automation machinery hardware hydraulic gear pump – Tend , The product will supply to all over the world, such as: UK, Finland, Gabon, With the best technological support, we have tailored our website for the best user experience and kept in mind your ease of shopping. we ensure that the best reaches you at your doorstep, in the shortest possible time and with the help of our efficient logistical partners i.e DHL and UPS. We promise quality, living by the motto of promising only what we can deliver.
  • This company has the idea of "better quality, lower processing costs, prices are more reasonable", so they have competitive product quality and price, that's the main reason we chose to cooperate.
    5 Stars By Jodie from Korea - 2018.09.23 17:37
    Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
    5 Stars By Diana from Cairo - 2017.02.28 14:19